Qmark Heaters

CRA Series – Residential Fan-Forced Zonal Wall Heaters

skip125 — Fri, 25 Jan 2008 21:58:40 +0000

CRA Series – Residential Fan-Forced Zonal Wall Heaters

Suitable for use in almost any room. Use single heaters in smaller rooms such as bedrooms and bathrooms. Use multiple heaters (controlled by a single thermostat) in larger rooms such as living rooms and family rooms. Wattage levels should be determined by heat loss calculations.

• Fast-response coil element assures quick heat and low maintenance.

• Three piece construction offers ease of installation.

• European styling: Sleek rounded corners complements any room decor.

• Dual Protection: Thermal cutout with indicator light and one time thermal fuse.

• Northern White finish.

• 500 – 1000 Watt units are approved for ceiling mounting.

• Patented Clip-n-Fit Feature

Qmark LFK Electric Wall Heaters

skip125 — Fri, 25 Jan 2008 21:51:54 +0000

Qmark LFK Electric Wall Heaters

• For supplementary heating of offices, reception rooms, game rooms, family rooms and similar light-duty commercial and residential applications.

• 1500, 2000, 3000, 4000 and 4800 watts at 240 volts; 60 hz.

• Steel finned metal sheath electric heating elements with low sheath temperature provide uniform heat and long service life.

• Rugged stamped steel front cover provides a down-flow air pattern and is attractively finished

in Navajo white. A hole plug is provided for tamper resistant installations.

• Integral double pole thermostat with positive off.

• Thermal overheat protector disconnects power in event of overheating due to accidental blockage.

• Built-in fan delay switch energizes fan motor only after elements are heated…prevents discharge of unheated air. When heat shuts off, de-energizes fan motor after residual heat has been dissipated.

• Can be wired with standard 90˚C wire.

•Permanently lubricated totally enclosed fan motor provides long life and low maintenance; gently distributes warmth throughout room area.

100 CFM.

•Recess or surface mount in standard 2”x 4”stud walls (Recess mounting is standard; surface- mounting frame LFK-SM for full surface mounting, LFKS-1 for 1”recess, and LFKS-2 for 2”recess are optional accessory – 19-3/16”high x 15-3/4”wide.)

QFG Series – Electric Fan-Forced Wall Heaters

skip125 — Fri, 25 Jan 2008 21:39:21 +0000

QFG Series – Electric Fan-Forced Wall Heaters

RESIDENTIAL: QFG Series electric in-wall heaters are suitable for use in almost any room. Use single heaters in smaller rooms such as bedrooms and bathrooms. Use multiple heaters (controlled by a single thermostat) in larger rooms such as living rooms and family rooms. Wattage should be determined through heat loss calculations.

COMMERCIAL: Suitable as the primary heat source in smaller rooms and as supplemental heat in almost any general use area.

• Dual Protection: Thermal cutout with indicator light and one time thermal fuse.

• Tangential blower for whisper quiet operation.

• Sienna White baked enamel finish.

• Open coil element assures quick heat and low maintenance.

• Three piece construction for ease of installation.

• Permanently lubricated, dust-protected bearings.

MOUNTING LIMITATIONS

For wall mounting only. Do not install back box closer than 4 inches from floor, 6 inches from adjacent walls and 12 inches from the ceiling. Do not install heater behind towel rack, behind door, in floor, in closet, in ceiling or where airflow may be obstructed. To insure proper operation, maintain 5-feet minimum clearance to furniture or other objects placed directly in front of the heater.

Qmark AWH4000 Series – Architectural Heavy-Duty Wall Heaters

skip125 — Fri, 25 Jan 2008 18:02:21 +0000

Qmark AWH4000 Series – Architectural Heavy-Duty Wall Heaters

APPLICATIONS

QMark’s high-capacity, heavy-duty fan-forced wall heaters are designed for use almost anywhere in commercial or industrial areas requiring high capacity and quick recovery. They perform exceptionally well in such applications as motels, entryways, stores, public rest rooms, warehouses and other large, hard to heat areas.

FEATURES

• 1500, 2000, 3000, 4000, and 4800 watts; 120, 208, 240, 277 volts; 60 hz.

• Steel finned metal sheath electric heating elements with low sheath temperatures provide uniform heat and long service life.

• Closely spaced grille bars discourage insertion of foreign objects and direct air downward to effectively distribute heat…keep floors warm and dry.

• Integral thermostat for quick installation… separate thermostat not necessary. (Range: 40° – 90°F.) AWH has tamper resistant thermostat adjustable with a narrow blade screwdriver through the bar grille.

• Thermal overheat protector disconnects power in case of overheating due to accidental blockage.

• Built-in power disconnect switch for added safety during maintenance.

• Can be wired with standard 90°C wire.

• Permanently lubricated totally enclosed fan motor provides long life and low maintenance; gently distributes warmth throughout room area. 100 CFM.

• Contemporary steel bar grille with baked enamel finish and satin finished aluminum frame…retains attractive appearance through years of use.*

• Optional accessory power control relays (24 or 120V holding coil) or pneumatic electric (P/E) switch.

• Recess or surface mount in standard 2” x 4” stud walls.

*Northern White color is optional. (Add NW suffix to cat. #)

Qmark AWH4000 Series – Architectural Heavy-Duty Wall Heaters

Click here to buy a Qmark AWH 4000 Heaters.

CWH3000 Series – Commercial Fan-Forced Wall Heaters

skip125 — Thu, 17 Jan 2008 22:22:49 +0000

CWH3000 Series – Commercial Fan-Forced Electric Wall Heaters.

For supplementary heating of offices, reception
rooms, game rooms, family rooms and similar lightduty commercial and residential
applications.

• 1500, 2000, 3000, 4000 and 4800 watts; 120, 208, 240, 277 volts; 60 hz.

• Steel finned metal sheath electric heating elements with low sheath temperatures provide uniform heat and long service life.

• Integral thermostat for quick installation…separate thermostat not necessary. (Range: 40-90˚F.) •Fan only operation for summer use.

•Thermal overheat protector disconnects power in event of overheating due to accidental blockage.

•Built-in power disconnect switch for added safety during maintenance.

•Built-in fan delay switch energizes fan motor only after elements are heated…prevents discharge of unheated air. When heat shuts off, de-energizes fan motor after residual heat has been dissipated.

•Can be wired with standard 90˚C wire.

•Permanently lubricated totally enclosed fan motor provides long life and low maintenance; gently distributes warmth throughout room area. 100 CFM.

•Front cover is finished in Northern White powder coating.A hole plug is provided for tamper resistant installations.

•Recess or surface mount in standard 2”x 4”stud walls (Recess mounting is standard; surface mounting frame CWH3SM for full surface mounting,

CWH3S-1 for 1”recess, and CWH3S-2 for 2”recess finished in Northern White powder coating are optional accessories – 19-3/16”high x 15-3/4”wide.)

MOUNTING LIMITATIONS

Do not install heater closer than 8” from floor or adjacent wall surface, behind towel rack or door, upside down or side up, in floor, ceiling or closet.